Siding Contractor in Richardson, TX Built for North Texas Hail and Heat
Richardson siding takes a beating. Summer afternoons hit 100°F, spring hail runs from March through June, and the Blackland Prairie clay under your slab shrinks and swells with every drought and downpour. Many homes here went up in the 1960s and '70s, so the original wood or hardboard on the gables, fascia and second stories has been through decades of that. Once it starts swelling, splitting or pulling away from the brick, patching it doesn't last long. Richardson Siding Experts replaces worn-out siding with James Hardie, fiber cement and vinyl, and we repair hail damage, rotted trim, soffit and fascia.
We're a Richardson-based crew, and we know the local housing stock. That includes brick ranches in Richardson Heights, the two-story brick-and-hardboard homes in Canyon Creek and Prairie Creek, and the mid-century moderns that need board-and-batten done right. We also work in Plano, Garland, Addison, University Park, Sachse and Murphy. Every project starts with a full exterior inspection. You also get color guidance, a written estimate, and a crew that cleans the site at the end of every workday.
- ✓Serving North Texas homeowners since 2020
- ✓Bonded and insured
- ✓Financing available
- ✓Full exterior inspection and written estimate
- ✓Color and profile guidance for mid-century homes
- ✓Crews keep the site clean every day
- ✓Coverage within a 20-mile radius of Richardson
Request Your Free Estimate
No obligation. Fast, honest quotes.
Thank you — your request was sent!
A member of the Richardson Siding Experts team will reach out shortly. Need help now? Call (214) 751-7439.
Why Richardson Homes Need a Siding Contractor Who Knows North Texas
Siding that holds up for 30 years in a mild climate can fail in half that time here. Richardson combines extreme sun, regular hail, expansive clay soil and an aging housing stock. Each of these calls for specific materials and installation details, and a generic install skips most of them.
Climate: Heat, Hail, Wind and Shifting Clay
Richardson sits in IECC climate zone 3A. July and August highs average in the mid-to-upper 90s, and most summers bring a run of 100°F+ days. That UV chalks paint, dries out caulk and can warp low-grade or dark vinyl, especially on west and south walls. DFW also ranks among the most hail-prone metros in the country. The June 13, 2012 storm that hit Richardson and north Dallas was one of the costliest hail events in Texas history. Wind matters too: the October 2019 EF-3 tornado tracked toward Richardson, and the December 2015 EF-4 struck Garland and Rowlett. Rainfall runs 37 to 40 inches a year, mostly in heavy spring and fall storms that test every flashing detail. Underneath it all, the Blackland Prairie clay shifts enough to rack walls and open joints. Freezes like Winter Storm Uri in 2021 push water into any cracks that are already there.
Built Environment: Mid-Century Ranches to 1980s Two-Stories
Richardson grew fast between the 1950s and '70s, fueled by Collins Radio, Texas Instruments and the Telecom Corridor. Most homes from that era are single-story brick-veneer ranches and split-levels with siding on the gables, eaves, porch walls and rear walls. The city also has a well-known group of mid-century modern homes, including Cliff May–designed ranches with vertical board-and-batten and T1-11-style cladding. Neighborhoods built in the '70s and '80s, like Canyon Creek, Prairie Creek, Northrich and Sherwood, are mostly two-story homes with brick on the first floor and hardboard or wood above. Many of those homes have Masonite-type hardboard or early OSB lap siding. Both products are known to swell, rot and delaminate, and some were the subject of national class-action settlements.
Codes, Permits, HOAs and Insurance Rules
Cities in our area enforce the International Residential Code with local amendments, and design wind speeds are around 115 mph. Re-siding permit rules differ between Richardson, Plano, Garland and Dallas, so we check with each building department before work starts. Masonry ordinances once limited siding to upper floors. Texas HB 2439 (2019) weakened those ordinances, but HOAs in Murphy, Sachse, Allen and Plano still often require architectural approval for colors and materials. Dallas conservation districts like the M Streets, and the Park Cities, add design review on top of that. Homes built before 1978 fall under the EPA's lead-safe RRP rule. For hail claims, Texas Insurance Code Chapter 707 makes deductible waivers illegal, so be cautious of any contractor who offers one.
Market Context: Long-Term Owners and Upgrading Buyers
Richardson has roughly 119,000 residents. Household incomes here are above the national median, supported by UT Dallas, the Telecom Corridor and State Farm's CityLine campus. Many long-time owners live in paid-off 1960s–70s homes, while younger families are buying older ranches and updating them. Plano and Allen have a large stock of 1980s–2000s homes that are due for exterior renewal. Buyers in Highland Park and University Park focus on craftsmanship and historic character, while owners in Garland and Mesquite often rely on insurance claims and financing. Across all of these markets, most homeowners want low-maintenance materials that help resale value.
Common Siding Problems We See in Richardson and North Texas
Most siding failures around Richardson trace back to a short list of causes: storms, sun, shifting soil, and materials that were never built to last. Here's what we find most often during inspections, why each problem shows up so often here, and how serious it usually is.
Hail-Cracked and Punctured Siding Serious
Impact damage from hailstones. It shows up as split or holed vinyl, dented aluminum and steel, chipped fiber cement edges, and paint knocked off wood. Even small cracks let wind-driven rain reach the sheathing behind the panels.
Why it's common hereDFW is consistently ranked among the most hail-prone and hail-costly metros in the country. Peak season runs from March through June, with a second, smaller peak in fall. The 2012 storm across Richardson and north Dallas showed how much damage one event can do to a whole neighborhood. Vinyl is more brittle on cool spring mornings, and older panels that have spent years in the sun crack easily. Insurance repairs often can't match discontinued colors, which leaves homes looking patched.
Signs you'll notice- Horizontal splits or round holes in vinyl panels
- Dents in aluminum siding, gutters or trim
- Chipped corners or exposed edges on fiber cement
- Bare spots where paint was knocked off wood
- Damage concentrated on the side the storm came from
- Granules from the roof collecting near the foundation
We see the most hail damage on north- and west-facing walls in Canyon Creek, Owens Farm and Spring Creek, and on early-vinyl homes in Garland and Mesquite. Newer Murphy and Sachse homes usually have chipped Hardie on their upper gables.
Our fix: Document the damage for your insurer, then replace the affected panels or full elevations with matched or upgraded material. Where hail is a recurring problem, impact-resistant fiber cement is often worth the upgrade.
Swelling and Rotting Hardboard or OSB Siding Serious
Masonite-type hardboard and early OSB lap siding soak up water at the edges, nail holes and bottom courses. The boards then swell, soften, mushroom around nail heads and eventually fall apart, often taking the sheathing behind them along.
Why it's common hereThousands of 1980s–90s homes in Richardson, Plano and Carrollton were built with these products. When heavy spring and fall rains combine with freeze-thaw cycles and caulk that has cracked in the heat, water gets into every unsealed edge. Several of these products ended up in national class-action settlements. Painting and spot patches only buy a little time, because the board is still taking on water underneath.
Signs you'll notice- Bottom edges that are puffy, swollen or flaking
- Paint bubbling around nail heads
- Soft spots that give when you press them
- Waffle patterns or delaminated layers
- Boards visibly bowing between studs
- Mold or dark streaks near grade
Common on second-story walls and chimney chases in Canyon Creek, Prairie Creek, Northrich, Sherwood and Deerfield in Plano. It's usually worst on the lowest courses next to flower beds and sprinkler spray.
Our fix: Remove the failing hardboard, inspect and replace any damaged sheathing, install a weather barrier, and re-clad in James Hardie or engineered wood with factory-primed or ColorPlus finish.
Foundation-Movement Gaps Where Brick Meets Siding Moderate
Open seams, buckled panels and cracked trim caused by seasonal foundation movement. It shows up most where brick veneer and siding meet, since the two materials move differently when the slab shifts.
Why it's common hereBlackland Prairie clay is among the most expansive soils in the country. It shrinks during summer drought and swells after fall rains, and the foundation moves with it. That movement racks walls and tears rigid caulk joints apart. A good contractor needs to tell a siding problem from a foundation problem and use flexible detailing that tolerates normal seasonal movement.
Signs you'll notice- Gaps at frieze boards and outside corners
- Butt joints separating on lap siding
- Diagonal cracks in brick that line up with siding gaps
- Trim pulling away from window frames
- Caulk torn open along brick ledges
- Doors sticking on the same wall
Most noticeable on 1960s–70s slab homes in Richardson Heights, Cottonwood Heights and Highland Terrace, and on Garland tract homes after long dry summers.
Our fix: Assess whether the foundation needs an engineer first. Then reset the siding with proper flashing at the brick line and use flexible, high-movement sealants and backer rod.
Heat-Warped or Oil-Canned Vinyl Moderate
Vinyl panels that wave, bulge or melt from heat. The usual causes are thin builder-grade panels, dark colors, nails driven too tight, or sunlight reflected from a neighbor's low-E windows.
Why it's common hereSummer surface temperatures on south and west walls in Richardson can run far above the 100°F air temperature. Low-grade vinyl softens in that heat. If installers nailed the panels too tight, they can't expand and contract, so they buckle. Low-E glass on newer homes nearby concentrates sunlight into hot spots that leave distorted, melted marks.
Signs you'll notice- Wavy, rippled lines across a wall
- Panels bulging out between nails
- Melted or distorted patches shaped like a window
- Panels that have unzipped or come loose
- Faded, chalky surface on darker colors
Most common in Garland, Mesquite and Rowlett on homes with early vinyl, and wherever new two-story infill sits next to older single-story homes.
Our fix: Replace the panels with heavier-gauge, heat-rated vinyl, nailed loose so they can move. On problem walls, consider fiber cement or a reflection shield.
Rotted Fascia, Soffit and Exterior Trim Moderate
Wood fascia boards, soffit panels and window or corner trim that have softened, split or lost their paint. This lets water, wasps, squirrels and birds into the attic and wall cavities.
Why it's common hereWood trim on 1960s–70s Richardson ranches has gone through decades of UV and summer heat that dried out the paint and caulk. Gutters overflowing in heavy spring storms soak the fascia. Woodpeckers and termites target soft wood, and once the paint film cracks, every rain does more damage.
Signs you'll notice- Peeling paint along the roofline
- Soft fascia behind the gutters
- Sagging or missing soffit panels
- Bird or squirrel holes at the eaves
- Split window and door trim
- Wasp nests in gaps
Very common on long eave lines of Richardson Heights and Reservation ranches and on the wide overhangs of mid-century modern homes.
Our fix: Replace the rotted sections with primed wood, fiber cement or PVC trim, install vented soffit, and seal and paint everything for full weather protection.
Failing Paint and Caulk on Fiber Cement Minor
Fiber cement itself holds up well, but its paint and sealant don't last forever. Chalked, peeling paint and cracked caulk at butt joints and windows let water reach cut edges, where the board can swell over time.
Why it's common hereBuilders in Murphy, Sachse, Wylie, Allen and The Colony installed a lot of James Hardie from the 1990s through the 2010s, often field-painted with builder-grade products. Intense North Texas UV shortens repaint cycles, and soil movement cracks rigid caulk. If owners skip maintenance, problems that started as cosmetic turn into moisture problems.
Signs you'll notice- Chalky residue when you touch the wall
- Peeling on south and west elevations
- Open butt joints or cracked caulk
- Faded or uneven color on gables
- Edge swelling at the bottom courses
Typical in HOA subdivisions in Murphy, Sachse, Wylie and Breckinridge Point, where upper gables, bay windows and dormers are hard for owners to reach and maintain.
Our fix: Replace any damaged boards, re-caulk with high-movement sealant, and repaint with premium exterior coatings or switch to factory-finished ColorPlus where HOAs allow.
Siding Services for Richardson and North Texas Homes
We focus on exterior cladding: replacing, repairing and upgrading siding, trim, soffit and fascia. We install James Hardie, other fiber cement brands, vinyl, engineered wood, cedar and metal, and we recommend materials based on your home's era, its exposure, and any HOA or district rules.
James Hardie Siding Installation ⭐ Specialty
We install James Hardie fiber cement lap, panel, shingle and trim products, including factory-finished ColorPlus options, on whole homes, upper floors and gables.
Our approachFull tear-off, sheathing inspection, house wrap, flashing at windows and the brick line, kick-out flashing, proper clearances, and fastening and gapping to manufacturer specifications.
In Richardson, TXHardie resists hail, holds up in the heat and is approved by most HOAs. It's our most common upgrade for hardboard on Canyon Creek and Plano two-stories.
Best for: Homeowners replacing rotted hardboard or OSB who want long-lasting, low-maintenance siding that helps resale value.
Siding Replacement Services ⭐ Specialty
We replace failed siding on full homes or individual elevations, especially when insurance repairs can't match discontinued colors or old hardboard profiles.
Our approachWe open the walls, repair hidden rot, upgrade the weather barrier and flashing, then re-clad and trim out so the exterior looks consistent and is sealed properly.
In Richardson, TXThis is common after hail in Richardson and Garland, and on 1980s homes in Northrich and Sherwood where patching the hardboard no longer works.
Best for: Homes with widespread swelling, hail damage or color mismatches.
Siding Installation
New siding for additions, renovations and full re-cladding projects, in whatever material suits the home.
Our approachFlat, solid substrate, continuous weather barrier, correct fastening and flashing details designed for 115 mph design wind speeds.
In Richardson, TXFrom Richardson Heights ranches to new additions in Lucas and Parker.
Best for: Additions, remodels and full exterior updates.
Vinyl Siding Installation
We install heavy-gauge, heat-rated vinyl in lighter, fade-resistant colors.
Our approachLoose nailing so panels can expand, correct overlaps, and J-channel and flashing at every opening.
In Richardson, TXA cost-effective choice for Garland, Mesquite and Rowlett homes replacing early, brittle vinyl.
Best for: Budget-conscious owners who want low maintenance.
Fiber Cement Siding Installation
Non-combustible fiber cement plank, panel and shingle siding from established manufacturers.
Our approachPrimed or prefinished boards, gapped joints, flashed butt joints and the required clearances at grade and the roofline.
In Richardson, TXIt stands up to sun, termites and hail better than wood or hardboard.
Best for: Long-term durability at a moderate cost.
Hardie Plank Siding Installation
HardiePlank lap siding in smooth or cedarmill textures and several exposures.
Our approachBlind or face nailing per spec, with flashing behind butt joints and painted cut edges.
In Richardson, TXIt's a close visual match to the original lap siding on Plano and Richardson two-stories.
Best for: Classic lap looks with fiber cement durability.
Hardie Board Installation
HardiePanel vertical siding and Hardie trim boards for gables, soffits and accent walls.
Our approachSealed vertical joints, flashed horizontal transitions and matching HardieTrim corners.
In Richardson, TXA good fit for gables and chimney chases on brick-first-floor homes.
Best for: Panel looks and rot-prone areas.
Board and Batten Siding Installation
Vertical board-and-batten in fiber cement, engineered wood or real wood.
Our approachBatten spacing laid out to the home's proportions, with flashed transitions where the siding meets brick or stone.
In Richardson, TXSuits mid-century moderns in Richardson and modern farmhouses in Lucas and Parker.
Best for: Owners who want a modern or mid-century look.
Board and Batten Exterior Installation
Full board-and-batten exterior makeovers, including trim, fascia and color planning.
Our approachCoordinated vertical cladding, wide trim and paint schemes, with HOA submittals prepared when needed.
In Richardson, TXA popular refresh for 1970s Richardson ranches being updated by younger buyers.
Best for: Whole-house style transformations.
Vertical Siding Installation
Vertical panel, T1-11-style and plank cladding for accent walls or full elevations.
Our approachFurring or rainscreen where appropriate, with Z-flashing at horizontal breaks.
In Richardson, TXReplaces worn T1-11 on Richardson's Cliff May–style ranches.
Best for: Mid-century restoration and contemporary designs.
Wood Siding Installation
Like-for-like wood clapboard and drop siding for historic and character homes.
Our approachBack-primed boards, proper ventilation gaps and profiles milled to match the originals.
In Richardson, TXOften expected in Park Cities and Dallas conservation districts.
Best for: Historic homes where authenticity matters.
Cedar Siding Installation
Cedar lap, board-and-batten and accent siding.
Our approachStainless or hot-dipped fasteners, a sealed finish on all sides, and enough clearance from grade.
In Richardson, TXFor University Park and Lake Highlands homeowners who want real wood.
Best for: Premium natural looks.
Cedar Shake Siding Installation
Cedar shakes and shingles for gables, dormers and full walls.
Our approachProper coursing and exposure over a breathable underlayment, with flashed transitions.
In Richardson, TXFits Tudor and Colonial Revival homes in Highland Park.
Best for: Historic or cottage-style character.
Engineered Wood Siding Installation
Engineered wood lap, panel and trim, including LP SmartSide-type products.
Our approachSealed cut edges, required clearances and painting to manufacturer specifications.
In Richardson, TXA lighter alternative for 1980s Plano and Carrollton homes.
Best for: Wood looks with better impact resistance.
Metal Siding Installation
Steel panel and lap siding for modern homes and outbuildings.
Our approachConcealed fasteners, closure strips and allowance for thermal movement.
In Richardson, TXUsed on modern builds and accent walls in Lucas and Parker.
Best for: Contemporary designs and shops.
Aluminum Siding Installation
Repair and replacement of aluminum siding and trim wraps.
Our approachMatching profiles where they're available and custom-bent coil stock for trim.
In Richardson, TXFound on older Garland and Mesquite homes after hail dents.
Best for: Homes that already have aluminum.
Stone Veneer Siding Installation
Stone veneer wainscots, accent walls and column wraps.
Our approachWeep screed, drainage plane and flashing where the stone meets siding.
In Richardson, TXMatches the stone-and-siding mix on Lucas and Parker estates.
Best for: Upscale curb appeal.
Modern Siding Installation
Mixed-material modern exteriors that combine panels, vertical siding and metal.
Our approachClean reveal trim, rainscreen details and coordinated color design.
In Richardson, TXFor CityLine-area professionals updating older ranches.
Best for: Contemporary renovations.
Siding Repair Services
Board-level repair of hail damage, rot, woodpecker holes and loose panels.
Our approachReplacing damaged pieces, re-flashing and sealing, and color-matching wherever possible.
In Richardson, TXFast fixes after spring storms across Richardson.
Best for: Damage limited to one area.
Soffit and Fascia Installation
Replacement of rotted fascia and soffit, with ventilation added.
Our approachFiber cement, PVC or aluminum-wrapped boards, plus vented soffit and critter-proofing.
In Richardson, TXCommon on the long eave lines of Richardson ranches.
Best for: Roofline rot and pest entry.
Exterior Trim Installation
Window, door, corner and frieze trim.
Our approachRot-resistant materials and flashed heads, sealed with flexible sealant.
In Richardson, TXHandles gaps that open with clay-soil movement.
Best for: Split or rotted trim.
Siding Inspection and Consultation
A full exterior inspection with written findings and recommendations.
Our approachMoisture checks, probing of suspect areas, and photo documentation of hail and rot.
In Richardson, TXUseful before a home sale, after a hailstorm, or for HOA planning.
Best for: Owners who aren't sure what they need.
Asbestos Siding Removal and Replacement
Replacement of older cement-asbestos shingle siding.
Our approachTesting first, with removal coordinated with licensed abatement professionals where required.
In Richardson, TXFound on some older homes in Dallas and Garland.
Best for: Pre-1980 homes with original shingles.
Mobile Home Siding Replacement
Re-siding manufactured homes with vinyl or metal.
Our approachLightweight systems, with skirting and trim updates.
In Richardson, TXFor manufactured homes within our service area.
Best for: Worn or hail-damaged manufactured homes.
Commercial Siding Installation
Siding for small commercial buildings, offices and multifamily properties.
Our approachPhased schedules to keep disruption low for tenants and HOA boards.
In Richardson, TXFits Addison townhome HOAs and small commercial buildings.
Best for: Property managers and HOAs.
How a Siding Project Works With Us
Every project follows the same five steps. You'll know what's happening, when it's happening, and what it costs before any siding comes off your house.
Full Exterior Inspection
- Walk all four elevations, the gables and the roofline
- Probe suspect areas for rot and moisture
- Photograph hail, heat and soil-movement damage
- Check flashing at the brick line and roof-to-wall joints
Local note: After a major hailstorm, inspection demand rises across Richardson, so book early in spring.
Material and Color Guidance
- Compare Hardie, fiber cement, vinyl and wood options
- Recommend profiles that fit your home's era and style
- Suggest heat-tolerant colors for south and west walls
- Identify HOA or district requirements
Local note: Mid-century homes get profile options that keep their original look.
Written Estimate and Approvals
- Itemized written estimate with scope and materials
- Notes on possible hidden-rot allowances
- Permit check with your city's building department
- HOA submittal help if needed; financing options reviewed
Local note: HOA approvals in Murphy, Sachse and Allen, and design review in Dallas conservation districts, can add a few weeks.
Installation
- Tear-off and sheathing repair
- Weather barrier, flashing and kick-out installation
- Siding, trim, soffit and fascia installation
- Site cleaned and magnetic nail sweep done daily
Local note: Summer crews start early to avoid peak heat, and pre-1978 homes need lead-safe containment.
Final Walkthrough
- Walk the finished exterior together
- Check that sealant, paint and trim are complete
- Review care and maintenance tips
- Hand over documentation
Local note: We go over sealant joints that will need checking after the clay soil goes through dry and wet seasons.
Why Richardson Homeowners Choose Richardson Siding Experts
We Know Richardson's Housing Stock
We're not guessing about your house. We work every week on 1960s brick ranches in Richardson Heights, two-story hardboard homes in Canyon Creek and Prairie Creek, and newer Hardie-clad homes in Murphy and Sachse. We know where these homes typically fail: chimney chases, roof-to-wall joints, and the seam where the brick stops and the siding starts. We also know how Blackland Prairie clay moves those seams around. That means fewer surprises on your project and installation details designed for how homes here actually age.
Bonded and Insured, With No Storm-Chaser Tactics
After every big hailstorm, out-of-town crews knock on doors across Richardson and Garland. We're a local company, bonded and insured, and we follow Texas law. We won't waive or absorb your deductible, since Texas Insurance Code Chapter 707 makes that illegal, and we won't pose as your adjuster. We'll inspect, document the damage with photos and give you a clear written estimate, so you have what you need when you talk to your insurance company.
Siding Is All We Do
We don't do roofing on the side or general handyman work. We focus on siding, trim, soffit and fascia. That focus shows in the details that usually separate a 10-year job from a 30-year one: kick-out flashing, butt-joint flashing, correct clearances at grade, loose-nailed vinyl that can move in 100°F heat, and painted fiber cement cut edges. We install James Hardie, fiber cement, vinyl, engineered wood, cedar and metal, and we'll tell you honestly which one fits your home.
Mid-Century Style, Done Right
Richardson has one of the best collections of mid-century modern homes in North Texas, including the Cliff May ranches. Replacing vertical board-and-batten or T1-11 with the wrong profile can hurt a home's character and its value. We help owners pick reveal widths, batten spacing and textures that keep the original look while using longer-lasting materials. We bring the same care to Craftsman and Colonial Revival homes in the Park Cities and Lake Highlands.
Written Estimates and Clear Pricing
Every project starts with a full exterior inspection and an itemized written estimate showing materials, square footage, trim and labor. Hidden rot behind old hardboard is common, so we tell you upfront where we expect it and how we'll price it if we find it. You get photos and approval before any extra work happens. No vague lump sums and no changing the price after the tear-off.
Clean Sites and Respect for Your Home
Re-siding is messy, but your yard doesn't have to look like it. Our crews protect landscaping and flower beds, run magnetic sweeps for nails, and clean the site at the end of every workday. That matters if you're living in the home, have kids or pets in the yard, or have an HOA watching the street. It also matters to neighbors in close-set neighborhoods like Cottonwood Heights and Duck Creek.
Financing for Bigger Projects
Replacing all the hardboard on a two-story Plano home or upgrading a whole Garland ranch to fiber cement is a major expense. Financing is available, so you can deal with rot and storm damage now instead of waiting while it spreads into the sheathing and framing. We'll go over options with your written estimate so you can compare monthly costs to the price of putting it off.
A Local Siding Contractor You Can Verify
Bonded • Insured • Financing available
Siding Service Areas Around Richardson
We're based in Richardson and serve homes within roughly 20 miles, from Park Cities historic homes to acreage estates in Lucas. Each area has its own housing eras, HOA rules and storm history, and we plan every project around them.
Richardson and North Collin County
East: Garland, Lake Ray Hubbard and Beyond
Dallas and the Park Cities
West: Addison to The Colony
We serve homes within about 20 miles of Richardson. If you're near the edge of that range, contact us to confirm availability. Not sure if we cover your area? Call (214) 751-7439.
How Much Does Siding Cost in Richardson, TX?
Siding costs here depend on how much siding your home actually has (many brick homes only have it on the gables or second story), what material you choose, and what's hiding behind the old boards. These are typical North Texas ranges to help you plan.
Material Choice Primary Factor
Vinyl is the most affordable, typically about $5–$9 per square foot installed around DFW. Fiber cement and James Hardie usually run $9–$15 per square foot, and factory-finished ColorPlus adds to that. Engineered wood falls in between. Cedar, cedar shake, stone veneer and metal are at the premium end. In this climate, spending more upfront on heat- and hail-tolerant material often lowers maintenance and repaint costs later.
Square Footage and Wall Layout Primary Factor
A Richardson brick ranch may have only 300–600 square feet of siding on its gables and fascia. A two-story Canyon Creek or Plano home with hardboard on the whole second floor can have 1,200–2,000 square feet. Gables, chimney chases, bay windows and dormers take more labor per square foot than flat walls, because of the cuts, flashing and trim involved.
Hidden Rot and Sheathing Repair Major Variable
Old hardboard and OSB often hide soft sheathing and sometimes damaged studs, especially at roof-to-wall joints, window sills and chimney chases. Sheathing replacement typically adds a few dollars per square foot where it's needed. Framing repairs are priced separately. We note likely trouble spots in your written estimate so you aren't caught off guard after tear-off.
Height and Access Secondary Factor
Second-story walls and high gables need scaffolding or lifts and take longer to install safely, particularly in summer when crews work shorter hours to avoid the heat. Tight side yards, steep lots and landscaping near the walls can also affect labor time and cost.
Trim, Soffit, Permits and Approvals Secondary Factor
Replacing fascia, soffit and window trim at the same time as the siding adds cost but usually saves money compared with doing it later. Permit fees, HOA submittals, lead-safe practices on pre-1978 homes, and design review in Dallas conservation districts can add modest costs and time.
| Typical project | Details | Estimated range |
|---|---|---|
| Hail repair on a section of vinyl or fiber cement | Richardson or Garland home, one or two damaged areas, color-matched where possible | $800 – $3,500 |
| Gables, fascia and soffit on a brick ranch | 1960s Richardson Heights ranch, about 400–600 sq ft of siding plus roofline trim, upgraded to Hardie | $7,500 – $15,000 |
| Hardboard-to-Hardie upgrade on a two-story | 1980s Canyon Creek or Plano home, about 1,400–1,800 sq ft second floor and chimney chase, sheathing repairs | $22,000 – $40,000 |
| Whole-house board-and-batten or premium exterior | Mid-century modern restoration or Lucas/Parker custom home, 2,500+ sq ft with stone or cedar accents | $40,000 – $85,000+ |
Financing is available for qualified homeowners. We'll go over options along with your written estimate. New siding protects the structure behind it, stops rot before it reaches the framing, and improves curb appeal in a competitive North Texas resale market. That's especially true when you replace dated hardboard with fiber cement that buyers know and trust.
Recent siding Projects in Richardson, TX
Siding Questions From Richardson Homeowners
How much does it cost to replace siding in Richardson?
Most Richardson projects fall between $7,500 and $40,000. Small hail repairs can cost under $1,000, and large premium exteriors can top $80,000. Since so many homes here are brick on the first floor, you're often paying only for the gables, fascia or second story, not the whole house. Fiber cement and James Hardie typically run $9–$15 per square foot installed, and vinyl usually runs $5–$9. The biggest wildcard is hidden rot behind old hardboard. Our written estimate flags likely problem areas so you can budget for them.
How long does a siding replacement take?
Most homes take 2 to 10 working days once materials arrive. A gable-and-fascia job on a ranch might take two or three days. A full second-story hardboard replacement on a Canyon Creek two-story usually takes a week or more, depending on how much sheathing needs repair. Before work starts, you may need to wait for HOA approval or a permit. Spring hail season and summer heat also affect scheduling, so booking in late summer or fall often gets you on the calendar faster.
Do I need a permit to re-side my house in Richardson or Plano?
It depends on the city and the scope. Minor repairs usually don't need a permit, but full re-siding may, and the rules differ between Richardson, Plano, Garland and Dallas. Many North Texas cities also require contractors to register before pulling permits. We confirm requirements with the city's building inspection department for every project. If you're in an HOA community in Murphy, Sachse, Allen or Plano, or in a Dallas conservation district or the Park Cities, you'll likely need design approval too. We'll help prepare those submittals.
Is James Hardie better than vinyl for North Texas?
For most Richardson homes, yes, though vinyl still makes sense in some cases. Fiber cement won't melt or warp in 100°F heat, it handles hail better than older vinyl, termites can't eat it, and it's non-combustible. It's also what many HOAs prefer. Good heavy-gauge vinyl in a lighter color costs less and needs no painting, which makes it a good fit for budget-focused projects in Garland or Mesquite. Avoid dark, thin vinyl on west-facing walls or next to a neighbor's low-E windows.
Will insurance cover my hail-damaged siding?
Often, yes. Hail damage is typically a covered peril under Texas homeowners policies, though your deductible and policy terms will decide what you get. We inspect the home, photograph the damage and give you a written estimate you can share with your insurer. By law, we can't waive or pay your deductible (Texas Insurance Code Chapter 707), and we don't act as your adjuster. If matching discontinued colors isn't possible, ask your insurer how your policy handles full-elevation replacement.
How do I know if my hardboard siding needs replacing instead of repair?
If you see swelling, soft spots, mushrooming around nail heads or flaking edges on more than a few boards, it's usually time to replace it. Masonite-type hardboard and early OSB siding keep absorbing water, so patched boards next to failing ones tend to fail too. Isolated hail damage or one rotted area near a sprinkler can be repaired. During our inspection, we probe and moisture-check the walls and tell you honestly which option makes financial sense for your home.
How can I make my siding last longer in this climate?
Keep sprinklers and mulch off the bottom courses, and leave several inches of clearance between the siding and the soil. Clean your gutters so spring downpours don't soak the fascia. Check the caulk at windows and where siding meets brick every year, especially after a long drought, because clay-soil movement tears it open. Repaint south and west walls before the paint chalks through. Choose lighter colors and factory-finished products, and make sure kick-out flashing is installed wherever a roof meets a wall.
When should I call right away instead of waiting?
Call soon if you see holes or cracks after a hailstorm, panels blown loose or unzipped by wind, soft or crumbling siding near a roofline, interior stains on exterior walls, or gaps where you can see sheathing. Each of those lets water into the wall during the next heavy rain, and in North Texas spring the next storm usually isn't far off. Small problems that get fixed quickly are much cheaper than replacing rotted sheathing and framing later.
Serving Richardson, TX & Nearby
Schedule Your Richardson Siding Inspection
Whether it's hail-split vinyl, swollen hardboard or a mid-century exterior that needs the right profile, start with a full inspection and a straight answer about what your home needs.
- ✓Full exterior inspection with photo documentation
- ✓Material, profile and color guidance for your home's style
- ✓Itemized written estimate with no vague lump sums
- ✓Help navigating HOA approvals and permit checks
- ✓A bonded and insured crew that cleans the site every day
- ✓Financing options for larger projects
Bonded • Insured